Digitizing
   
       
 











 


Size Guideline


It is necessary to decide the size of design before you send it to us. Sizing factors include height, width, position / placement where design is to be produce, For example: it is better to make a left chest design not more than 4 inches wide (101.6 millimeters), as the design will fall into the armpit.

Secondly, small lettering has always been a troublemaker. Small letters cannot be embroidered less than .22 inches height ( 5 millimeters ). If lettering is any smaller you will not be able to see the letters clearly, unless there is a stable fill background under the lettering.

We can define some ways to control the neatness in small lettering by changing design dimensions, changing Lower case lettering into uppercase, eliminate some of the small letters, placing the letters on 2 or more lines or Arc the lettering around the logo.

Standard sizes of embroidery related to its location:

Location
Height (inches)
Width (inches)
Height (millimeters)
Width (millimeters)
Hat/Cap:
2.25
4
57
102
Left Chest
3.5
4
89
102
Front Chest
6
6
125
152
Jacket Back
11
11
279
279

** Please note that due to various types and patterns of art, sizes may not coincide with the size table that we have above. For example for caps, if the height is 2.25 inches, width may not necessary be 4 inches. It could be more or less. If width is more than 4 inches (for caps), it will fall out of the cap size and cannot be embroidered and size needs to be adjusted to fall into the range of size table specified above. **



 
   
   
   
   
   
   
   
 
Home |
|  About Us |   Contact Us | Site map